WBPP fails in the Measurements step. I would like help identifying the root cause. I have not seen this type of failure before 1/2/2023. Two screen captures are attached. One shows the pipeline report and the second shows the log warnings identifying the measurement failure results in those 60 sec subs being discarded. PixInsight does succeed for the luminous subs, but fails for the color filter subs. I repeated the WBPP on 300 sec subs and no Measurement failures occurred. I believe the failures are related to the average signal level in the sub.
If different screen captures are needed, I will do so.
Clear skies
Comments
masterFlat_BIN_1_4656x3520_FILTER_Blu_mono_1__integration
K
count (%) 100.00000
count (px) 16389120
mean 63.30797
median 63.40456
avgDev 2.01988
MAD 2.03423
minimum 51.23238
maximum 69.36117
masterDark_BIN_1_4656x3520_EXPOSURE_60_00s_integration
K
count (%) 100.00000
count (px) 16389120
mean 8.30147
median 7.95642
avgDev 0.91904
MAD 0.60920
minimum 5.31258
maximum 254.87938
masterFlat_BIN_1_4656x3520_FILTER_Blu_mono_1__integration
K
count (%) 100.00000
count (px) 16389120
mean 63.30797
median 63.40456
avgDev 2.01988
MAD 2.03423
minimum 51.23238
maximum 69.36117
L_M101_60s_2021_04_16_03_05_42_ASI1600MM_Mono_Blu_G100_20C_c
K
count (%) 100.00000
count (px) 16389120
mean 0.01120
median 0.00000
avgDev 0.01404
MAD 0.00000
minimum 0.00000
maximum 255.00000